light reflective busbar manufacturer——RAYTRON

After 10 years of persistent efforts, Raytron has become the most professional manufacturer of high precision copper & copper-clad aluminum flat ribbon wire & strip in China and one of the very few manufacturers in China that can produce flat wire & strip with a width to thickness ratio of higher than 100 times and copper strip & flat ribbon wire with ultra-low yield strength below 110Mpa. High dimensional accuracy and straightness are also guaranteed.RAYTRON, as one of the leading light reflective busbar manufacturers, is your absolute choice.

light reflective busbar specifications

light reflective busbar transport note: 1:

1, light reflective busbar should be lightly loaded and unloaded during transportation to prevent collision, abrasion and pollution, and take shockproof measures;

2, avoid light reflective busbar directly exposed to the air for a long time, should be stored in a ventilated, dry warehouse or indoor; use and then remove the winding film or vacuum bag, stop using in time to wrap with winding film well;

3、Do not place or take the product vertically during handling and use, but keep the shaft hole in horizontal direction;

4、It is strictly forbidden to mix with volatile and corrosive goods or sharp and hard goods, and ensure that there is no mechanical damage, and that the “direction mark” of the packing box is consistent with the actual transportation direction.